Second-hand Equipment

Unboxed.

For the Nikon F100. The MB-15 increases film advance from 4.5 to 5 fps no matter which batteries are used. It features an alternative shutter release button and a command dial for comfortable vertical shooting and runs on six 1.5V LR6 (AA-size alkaline) or 1.5V FR6 (AA-size lithium) batteries, or on an MN-15 Ni-MH rechargeable battery pack (not included).

The Nikon MB-10 Multi-Power Vertical Grip adds dimension to the bottom of the N90s, making the grip larger without adding excessive weight. It enables the vertical holding of the N90s to be more comfortable and useful, providing a vertical shutter release button. The MB-10's quick-change battery clip easily slides in and out for fast power changes & accommodates either four AA-type batteries with the included MS-10 battery tray or two three-volt lithium cells using the optional MS-11 battery tray.

Unboxed.

For the Nikon F6. The MB-40 High Speed battery Pack enables up to 8 fps second frame advance and has a separate shutter button, a multi-selector, a command and sub-command dial and AF-On buttons for vertical shooting.

Unboxed.

The MB-D10 multi-power battery pack increases the maximum frame advance rate to 8 frames per second * and extends autonomous operating time when using batteries. It is ergonomically designed for improved grip with the camera in the vertical shooting position and is powered by eight AA-size standard batteries or a specific Nikon battery. Features alternative shutter-release button, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials.

Boxed with AA holder. The MB-D11 battery pack extends autonomous operating time. It enables seamless switching between power sources, and is equipped with a shutter release button and command dials for vertical shooting. Boasts a tough magnesium alloy cover for protection. Powered by specific Nikon batteries and Ni-MH or lithium AA-size batteries.

The MB-D11 battery pack extends autonomous operating time. It enables seamless switching between power sources, and is equipped with a shutter release button and command dials for vertical shooting. Boasts a tough magnesium alloy cover for protection. Powered by specific Nikon batteries and Ni-MH or lithium AA-size batteries.

The MB-D11 battery pack extends autonomous operating time. It enables seamless switching between power sources, and is equipped with a shutter release button and command dials for vertical shooting. Boasts a tough magnesium alloy cover for protection. Powered by specific Nikon batteries and Ni-MH or lithium AA-size batteries.

Comes with AA battery holder. The MB-D11 battery pack extends autonomous operating time. It enables seamless switching between power sources, and is equipped with a shutter release button and command dials for vertical shooting. Boasts a tough magnesium alloy cover for protection. Powered by specific Nikon batteries and Ni-MH or lithium AA-size batteries.

Comes with AA battery holder. The MB-D11 battery pack extends autonomous operating time. It enables seamless switching between power sources, and is equipped with a shutter release button and command dials for vertical shooting. Boasts a tough magnesium alloy cover for protection. Powered by specific Nikon batteries and Ni-MH or lithium AA-size batteries.

MS-D12 AA battery holder, holder case and instruction manual. The MB-D12 multi-power battery pack increases the maximum frame advance rate to 6 frames per second and extends autonomous operating time when using batteries. It is ergonomically designed for improved grip with the camera in the vertical shooting position and is powered by eight AA-size standard batteries or a specific Nikon battery. Features alternative shutter-release button, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials.

MS-D12 AA battery holder, holder case and instruction manual. The MB-D12 multi-power battery pack increases the maximum frame advance rate to 6 frames per second and extends autonomous operating time when using batteries. It is ergonomically designed for improved grip with the camera in the vertical shooting position and is powered by eight AA-size standard batteries or a specific Nikon battery. Features alternative shutter-release button, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials.

Comes with grip and EN-EL15 battery holder only.

The MB-D12 multi-power battery pack increases the maximum frame advance rate to 6 frames per second and extends autonomous operating time when using batteries. It is ergonomically designed for improved grip with the camera in the vertical shooting position and is powered by eight AA-size standard batteries or a specific Nikon battery. Features alternative shutter-release button, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials.

Boxed. Includes both battery trays.

The MB-D12 multi-power battery pack increases the maximum frame advance rate to 6 frames per second and extends autonomous operating time when using batteries. It is ergonomically designed for improved grip with the camera in the vertical shooting position and is powered by eight AA-size standard batteries or a specific Nikon battery. Features alternative shutter-release button, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials.

Unboxed.

The MB-D12 multi-power battery pack increases the maximum frame advance rate to 6 frames per second and extends autonomous operating time when using batteries. It is ergonomically designed for improved grip with the camera in the vertical shooting position and is powered by eight AA-size standard batteries or a specific Nikon battery. Features alternative shutter-release button, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials.

Boxed and complete. The MB-D14 multi-power battery pack extends autonomous operating time and facilitates more comfortable handling when shooting in portrait mode. The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials. It is powered by six AA-size standard batteries or a specific Nikon Li-ion battery.

BOXED AND COMPLETE.
The MB-D14 multi-power battery pack extends autonomous operating time and facilitates more comfortable handling when shooting in portrait mode.

The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials. It is powered by six AA-size standard batteries or a specific Nikon Li-ion battery.

Boxed with AA holder. The MB-D14 multi-power battery pack extends autonomous operating time and facilitates more comfortable handling when shooting in portrait mode.

The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials. It is powered by six AA-size standard batteries or a specific Nikon Li-ion battery.

Boxed with EN-EL15 & AA holders. The MB-D14 multi-power battery pack extends autonomous operating time and facilitates more comfortable handling when shooting in portrait mode.

The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials. It is powered by six AA-size standard batteries or a specific Nikon Li-ion battery.

Boxed with AA holder. The MB-D14 multi-power battery pack extends autonomous operating time and facilitates more comfortable handling when shooting in portrait mode.

The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials. It is powered by six AA-size standard batteries or a specific Nikon Li-ion battery.

Boxed & Complete.

The MB-D14 multi-power battery pack extends autonomous operating time and facilitates more comfortable handling when shooting in portrait mode.

The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials. It is powered by six AA-size standard batteries or a specific Nikon Li-ion battery.

Boxed and complete. The MB-D14 multi-power battery pack extends autonomous operating time and facilitates more comfortable handling when shooting in portrait mode. The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub command dials. It is powered by six AA-size standard batteries or a specific Nikon Li-ion battery.

Unboxed (supplied with EN-EL15 holder only). The MB-D15 is equipped with a shutter-release button, AE/AF lock button, multi selector, and main- and sub-command dials for improved operation when taking photographs with the camera vertically oriented. The MB-D15 Multi-Power Battery Pack can be powered either by six AA batteries (Alkaline or Ni-MH or Lithium), or EN-EL15 rechargeable Li-ion batteries. To use the MB-D15 with AA batteries, use the MS-D14 AA Battery Holder. When using EN-EL15 batteries to power the MB-D15, use the MS-D14EN Battery Holder.

Unboxed.

The Multi-Power Battery Pack MB-D200 is ergonomically designed for extended stability and potential for vertical shooting. It runs either on AA-size batteries or 2x EN-EL3e batteries. When 2 EN-EL3e batteries are used, power is sequentially consumed, so the battery exhausted first can be replaced independently. It has an extra main- and sub command dial and alternative buttons for shutter release and AF start. The MB-D200 weighs approx. 230g and its dimensions are approx. 147.5 (W) x 72.5 (D) x 110 (H) mm.

Unboxed.

The Multi-Power Battery Pack MB-D200 is ergonomically designed for extended stability and potential for vertical shooting. It runs either on AA-size batteries or 2x EN-EL3e batteries. When 2 EN-EL3e batteries are used, power is sequentially consumed, so the battery exhausted first can be replaced independently. It has an extra main- and sub command dial and alternative buttons for shutter release and AF start. The MB-D200 weighs approx. 230g and its dimensions are approx. 147.5 (W) x 72.5 (D) x 110 (H) mm.

Boxed with manual.

The Multi-Power Battery Pack MB-D200 is ergonomically designed for extended stability and potential for vertical shooting. It runs either on AA-size batteries or 2x EN-EL3e batteries. When 2 EN-EL3e batteries are used, power is sequentially consumed, so the battery exhausted first can be replaced independently. It has an extra main- and sub command dial and alternative buttons for shutter release and AF start. The MB-D200 weighs approx. 230g and its dimensions are approx. 147.5 (W) x 72.5 (D) x 110 (H) mm.

Nikon MH-20 is a quick charger for the MN-20 NiCd battery pack, which is used with the MB-23 Multi-Power High Speed Battery Pack. The MH-20 can charge up to two MN-20 units sequentially, and operate automatically with voltage from 100V to 240V.The recharging time with one battery attached is approximately 90 minutes, with two batteries about three hours.

Boxed and complete.

Last of the brand-new stock. Allows the doubling up of battery power on a stable bracket for powerful flash use. RRP £336

Battery chamber cover for selected Nikon battery grips.

Unboxed. Supplied with both battery trays.

The MB-D17 is a multi-power battery pack that extends the autonomous operating time of certain Nikon DSLRs.

Use of this battery pack also facilitates more comfortable handling when shooting in portrait mode.

The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub-command dials.

It can be powered by Nikon’s EN-EL15 Li-ion battery or six AA-size standard batteries.

When using the optional BL-5 battery adapter, the MB-D17 can also be powered by Nikon’s EN-EL18/EN-EL18a Li-ion batteries, which are compatible with Nikon’s flagship D4-series cameras and the D5.

Boxed. Supplied with both battery trays.

The MB-D17 is a multi-power battery pack that extends the autonomous operating time of certain Nikon DSLRs.

Use of this battery pack also facilitates more comfortable handling when shooting in portrait mode.

The pack features alternative shutter-release, multi-selector and AF start buttons for use when holding the camera in the vertical shooting position, as well as secondary main- and sub-command dials.

It can be powered by Nikon’s EN-EL15 Li-ion battery or six AA-size standard batteries.

When using the optional BL-5 battery adapter, the MB-D17 can also be powered by Nikon’s EN-EL18/EN-EL18a Li-ion batteries, which are compatible with Nikon’s flagship D4-series cameras and the D5.

The MB-N10 battery pack extends autonomous operating time by approximately 1.8x and facilitates more comfortable balance when using long tele lenses.

It is powered by up to two Nikon EN-EL15b rechargeable Li-ion batteries (available separately).

The dust and moisture protected battery pack features a LED battery charge indicator for each of the two battery chambers.

Hot swapping of batteries is supported, convenient for use with extended video shooting or interval timer photography.

Direct charging of batteries installed in the battery grip is supported by using the AC charging adapter EH-7P (available separately).

If the battery pack is attached to the camera, the camera needs to be turned off in order to activate battery charging via the grip’s integrated USB-port.

A set of nine plates.

Nikon Data Back MF-10 and MF-11 offer three separate devices for entering data – the timepiece unit, the dating unit and the memo plates. The timepiece unit is a miniature three-hand clock with main – spring-powered movement for up to 24 hours of continuous operation. The dating unit offers control of dating information and features year/month/day selection via click start thumb-wheel controls. Memo plates are available for entry of hand-written information such as lens settings, shooting location, type of film, etc.

case, boxed UNUSED

The Nikon MF-2 provides the largest bulk film transport capacity available for the Nikon F2 series. Its film chambers and optional bulk film cassettes (MZ-2) accept standard 100-foot bulk film loads for up to 750 exposures at a time.

Film advance itself is done by the MF-2's own built-in motor. When the MF-2 is attached to an MD-2-equiped camera it "blanks out" all the speed and operation controls (including the S/C [single and continuous] knob of the MD-2 motor drive unit. Speed selection of up to 4 frames per second is then made via the MF-2's rear control panel, regardless of the motor drive's firing rate.

Power socket/remote terminal: Operating power is supplied by the Nikon AC/DC Converter MA-2/MA-4. (Not Supplied)

MF-2 and 2x MZ-2 supplied only. No camera body.

boxed

Boxed and complete.

The CB-N4000 is a black leather protective body case designed specifically for the Nikon 1 V2 camera.

Leather case for F90.

Featuring a two-piece construction consisting of rugged camera cradle and flip-open nosepiece, both with semi-gloss black finish and full plush lining, these sturdy leather cases offer the finest protection for

Nikon F2 cameras. The model CH-5 case accepts standard finder/body combinations with lenses of from wide-angle to 43-86mm f/3.5 Zoom-Nikkor lens.

The CL-N101 is an optional accessory, soft lens case that fits the 1 NIKKOR VR 10-30mm f/2.5-5.6 standard lens or 1 NIKKOR 10mm f/2.8 single-focus lens, designed to protect the lens when it is not in use. Color: Black.

The CL-N102 is an optional accessory soft lens case, custom designed for the 1 NIKKOR 10-100mm power drive zoom lens, designed to protect the lens when it is not being used. Color: Black.

The FB-11 is Nikon’s highest capacity case and made of cowhide. It is particularly recommended for the photographer who has an extensive collection of bulky accessories, in addition to the usual lenses and camera bodies. For example, bellows units, finders, speedlights, meters, and motor drives can all be accommodated in the lower portion of the case’s two tier system, while the top tray contains two camera cradles with adjustable lens straps. A separate set of Velcro-type adjustable lens retainers allows one long telephoto lens to be stored additionally in the upper compartment along with the camera bodies. Removable partitions in the lower chamber allow the space to be custom-tailored to the specific requirements of the user. The interior of the case is finished in soft plush to keep all equipment scratch-free, and rein-forced handstraps leather luggage tag and a shoulder strap are provided.

Brown tan leather

Size: 38 x 22 x 30cm Weight: 3.1kg

Nikon compartment cases are specially designed to be a safe, convenient way for the photographer to carry a variety of cameras, lenses and accessories. Each provides a high degree of flexibility for the photographer with specialised requirements, and each offers a high degree of security for delicate optical accessories while affording easy access to all sections of the case. The chief considerations in any compartment case durability and accessibility.

Nikon cases excel in both areas. Made of the finest materials, each case is built to stand up to the kind of hard use that the most heavy-duty photographers will give it.

Double-stitched and reinforced in all critical stress areas, Nikon cases are tough on the outside and safe on the inside.

The FB-15 is a versatile compartment case in handsome brown leather. The two-tier design keeps equipment well-organized for quick access.

The bottom level can be divided into three compartments for individual requirements using the removable partitions. Soft plush dividers further aid in keeping items separate and secure. The lid of these compartments may be secured in the open position, allowing taller items, like a camera with an attached motor drive to be stored with ease.

This particular combination is especially at home in the FB-15, as an accessory pouch is provided which fits the camera and motor ensemble exactly. The upper tray comes with a movable camera cradle which fastens securely with Velcro retainers.

The case is supplied with both reinforced handstraps and a shoulder strap with a non-slip rubber pad.

Dimensions: 33 x 19 x 23cm (13 x 7.5 x 9.1ins.)

Weight: 2.5kg (5.5Ibs)

Nikon leather case for Nikonos II camera, also fits the Nikonos I and the original French-made Calypso predecessor to the Nikonos I.

Enables reversed lens use auto-aperture with a cable release.

This extension ring E2 fits between the camera and lens to give an extra 14mm of lens extension so the lens can focus closer than its normal close focusing distance for close up shots. A semi automatic plunger permits focusing at full aperture for the brightest possible viewfinder image.

The Nikon AR-7 Double Cable Release can be used in combination with the PB-6 Bellows Focusing Attachment and will stop the lens down to the preselected aperture at the moment of exposure.

Boxed and complete. (Serial no. 1820802326)

The Nikon DR-4 Right Angle Viewing attachment can be used on many Nikon SLR cameras allowing users to view 100% of the camera's viewfinder by looking down into the camera instead of straight into the back of the camera.

This can be very useful when the camera is low to the ground when doing macro photography or high on a copy stand for copy work. In addition to "normal" right angle viewing the DR-4 also rotates around so the image can be viewed from many different angles.

The Nikon 6X focusing finder DW-2 provides precise focusing and right-angle viewing for F2 users, along with the advantages of a distortion-free image and higher magnification covering the entire field; thus, the DW-2 proves invaluable for application such as photomicrography, close-ups or other situations where critical focusing is required.

Critical focusing of the aerial image is performed with the DW-2 via the parallax focusing technique. the photographer focuses his or her eye with the cross-hair on the clear screen, etc. (the Type C and M screens prove excellent for this) and then focuses object image via the camera lens or by means of bellows as normal; then, to verify critical focusing, the photographer shifts his eye (either right/left or up/down) and, if image shift is noted, re-adjusts the image focus until the image does not shift from the crossline. The DW-2 is also provided with an adjustment mechanism permitting continuous eyesight correction of from +3 to --5 dioptres; the index dot and reference line permit alignment for the standard -1 dioptre setting (i.e. the image appears as though viewed at a distance of 1m) as most comfortable for viewing. Note that this finder can also be used with Nikon F camera bodies; simply remove the screws securing the finder nameplate in place, slip off the nameplate and mount the finder on the camera in the normal way.

Specifications

• Finder coverage: Virtually 100% of image recorded on film
• Visual image magnification: 1.2 (50mm lens stand at set to infinity focus): finder provided with +3 ~ -5 dioptre adjustment range I-relief distance 16 to 19 mm
• Dimensions: 52mm (W) x 54mm (D) x 65mm (H)
• Weight: 230g

The Nikon 6X focusing finder DW-2 provides precise focusing and right-angle viewing for F2 users, along with the advantages of a distortion-free image and higher magnification covering the entire field; thus, the DW-2 proves invaluable for application such as photomicrography, close-ups or other situations where critical focusing is required.

Critical focusing of the aerial image is performed with the DW-2 via the parallax focusing technique. the photographer focuses his or her eye with the cross-hair on the clear screen, etc. (the Type C and M screens prove excellent for this) and then focuses object image via the camera lens or by means of bellows as normal; then, to verify critical focusing, the photographer shifts his eye (either right/left or up/down) and, if image shift is noted, re-adjusts the image focus until the image does not shift from the crossline. The DW-2 is also provided with an adjustment mechanism permitting continuous eyesight correction of from +3 to –5 dioptres; the index dot and reference line permit alignment for the standard -1 dioptre setting (i.e. the image appears as though viewed at a distance of 1m) as most comfortable for viewing. Note that this finder can also be used with Nikon F camera bodies; simply remove the screws securing the finder nameplate in place, slip off the nameplate and mount the finder on the camera in the normal way.

Specifications

• Finder coverage: Virtually 100% of image recorded on film
• Visual image magnification: 1.2 (50mm lens stand at set to infinity focus): finder provided with +3 ~ -5 dioptre adjustment range I-relief distance 16 to 19 mm
• Dimensions: 52mm (W) x 54mm (D) x 65mm (H)
• Weight: 230g

NEAR NEW 99.9% (CHALLENGE... try to find any signs of handling!) The Dark Box M-35S is an improved version of the M-35, enabling picture formats in half-size (17.5mm x 24mm) format by means of a change-over knob. The Dark Box is specifically designed for taking photomicrographs in combination with the Nikon Microflex, using a Type B Adapter Ring.This very fine example (serial no. 88275) is supplied c/w original instruction manual and early grey coloured maker's box

Exceptionally useful due to tripod mount and facility for swinging body from horizontal (landscape) to (vertical) portrait mode (RRP £226). Maximum extension with a single ring.

Exceptionally useful due to tripod mount and facility for swinging body from horizontal (landscape) to (vertical) portrait mode (RRP £226). Maximum extension with a single ring.

Exceptionally useful due to tripod mount and facility for swinging body from horizontal (landscape) to (vertical) portrait mode (RRP £226). Maximum extension with a single ring.

Nikon PS-5 Slide Copying Adapter enables reproduction of 35mm transparencies in black and white or color, either full size or cropped and magnified. This unit is designed for the Model PB-5 Bellows. This unit has almost the same features as the PS-4 with the exception for film strip trays and the frame-shifting mechanism. It is used with the PB-4 or PB-5 Bellows. It also has trays for rolls of unmounted film and a magnet to hold the light-tight bellows shut when not in use.

Boxed. Like the B2 and B8, the B12 Dark-Blue Filter subtracts red and thus cools down colourations. B2 is a mild filter used with daylight film to remove the reddish tinge from sunrise and sunset shots. The medium-blue B8 corrects colour when clear flashbulbs are used with daylight film. B12 is a colour conversion filter which naturalises the red cast produced by photofloods when shooting indoors with daylight film.

Filter factor is 1.2 - 2.2.

Boxed. Like the B8 and B12, the B2 Light Blue Filter subtracts red and thus cools down colourations. B2 is a mild filter used with daylight film to remove the reddish tinge from sunrise and sunset shots. The medium-blue B8 corrects colour when clear flashbulbs are used with daylight film. B12 is a colour conversion filter which naturalises the red cast produced by photofloods when shooting indoors with daylight film.

Filter factor is 1.2 - 2.2.

Boxed. Like the B2 and B12, the B8 Mid-Blue Filter subtracts red and thus cools down colourations. B2 is a mild filter used with daylight film to remove the reddish tinge from sunrise and sunset shots. The medium-blue B8 corrects colour when clear flashbulbs are used with daylight film. B12 is a colour conversion filter which naturalises the red cast produced by photofloods when shooting indoors with daylight film.

Filter factor is 1.2 - 2.2.

chrome rim, Nippon Kogaku triangle keeper

Black, Boxed, MINT

Black.

Unboxed.

Excellent++

Black.

Boxed.

MINT-

Chrome.

Boxed.

MINT-

complete with plastic protector for base

RRP (BEFORE MASSIVE PRICE INCREASES) £423

X High Magnification Finder DW-21. This Spot metered viewfinder is designed to make critical close-up work faster and easier. It enlarges the comp;ete viewfinder image by six times. The DW-21 also offers a -5 to +3 diopter adjustment for eyesight correction. Rubber eyecup and eyepiece cap. Requires SC-24 cord for TTL flash operation.

6X High Magnification Finder DW-21. This Spot metered viewfinder is designed to make critical close-up work faster and easier. It enlarges the complete viewfinder image by six times. The DW-21 also offers a -5 to +3 diopter adjustment for eyesight correction. Rubber eyecup and eyepiece cap. Requires SC-24 cord for TTL flash operation.

The DW-4 is ideal for exacting duplicating, photomicrography, scientific research or astronomical photography. Its 6-element optics magnify the entire image (including data readouts) fully 6X magnification. Built in -5 to +3 diopter adjustment assures highest accuracy and comfort. It permits aerial (parallax) focusing with appropriate F3 screens. Other than it is an excellent finder, it also serves as a superior quality loupe for inspecting negatives and slides. It comes with a rubber eyepiece cup and eyepiece shutter.

This is the very rare first type finder for the 7.5mm f/5.6 & 8mm f/8 Fisheye-Nikkor lenses date 1962.

A set of nine plates.

Nikon Data Back MF-10 and MF-11 offer three separate devices for entering data – the timepiece unit, the dating unit and the memo plates. The timepiece unit is a miniature three-hand clock with main – spring-powered movement for up to 24 hours of continuous operation. The dating unit offers control of dating information and features year/month/day selection via click start thumb-wheel controls. Memo plates are available for entry of hand-written information such as lens settings, shooting location, type of film, etc.

Nikon HB-17 Lens Hood, Known as the “Safari" version grey finish for 80-200mm f/2.8D grey finish.

Nikon HN-35 - Lens hood  for Nikkor 45mm f/2.8P AIS (CHROME)

A very rare accessory.

Nikon Adapter converts Nikon AR-2 cable release (F & F2) to AR-3 standard cable release.

The Remote Cord MC-12A is exclusively designed for use with the Nikon Motor Drive MD-4 attached to the Nikon F3-series camera, the Motor Drive MD-15 attached to the Nikon FA camera, or for direct use with the F4s, F-801, F-501 or F-301 camera. It can also be attached to the MD-12 motor drive. It enables you to perform remote control operations up to 3 meters (10 feet) away from the camera.

The WG-AS2 water guard is useful for protecting the camera’s hot shoe contact when the SB-910 or SB-900 Speedlight is mounted on the D300 D-SLR.

Provides infrared light remote control for three separate channels to enable automatic operation of motor-driven cameras at distances up to 100m. Compact and easy to handle. Wireless slave flash operation is also possible.

(for cameras with two-pin remote terminal) for Nikon F4, F70, F3 with MD-4 motor drive, FM3A with MD-12 motor drive & FM2 with MD-12 motor drive.

Specifications

No. of control output channels

Three channels available

Shooting modes

S for single-frame shooting, C for continuous shooting,

DELAY for 3 sec. delayed shooting and Test for operation check.

Number of flashes* (single-frame shooting)

Approx. 4,500

Continuous standby time*

Approx. 250 hours

Power source

Eight AA-type batteries -

Alkaline (four for

Transmitter and four for

Receiver)

Dimensions (W × H × D)

Transmitter: Approx. 69 × 163

× 22mm; Receiver: Approx. 64 × 93 × 75mm

Weight (without batteries)

Transmitter: Approx. 130g:

*Does not include the receiver

Nippon Kogaku manufactured a small Bakelite battery tester sometimes known as a volt meter for the Nikon rangefinder S-36 motor drives. This has a measuring range of up to 11 V, whereas the battery tester for the Nikon F-36 motor dries measures up to 14 V. They also made a version for Nikkorex-8 and Nikkorex-8 F cine cameras. It has on the display panel a red area for insufficient charge and a white area for adequate charge.

AS NEW (APPEARS UNUSED) IN BOX!

H-3 Tripod Mounting Adapter For attaching Nikon cameras with seperate motor drives to tripod or Repro-copy Outfit PF-4.

AH-3 Tripod Mounting Adapter For attaching Nikon cameras with separate motor drives to tripod or Repro-copy Outfit PF-4.

The Nikon Panorama Head fits between a Nikon and tripod for shooting panoramic scenes in sequences covering up to 360 degrees. Click stops allow for a slight overlap between successive frames so the final series of pictures can be matched perfectly.

Designed to work with lenses of five different focal lengths, the panorama head has a built-in bubble level so the camera and panorama head can be kept perfectly level.

Attaching the camera to the panorama head

First release the clamp lever by turning it clockwise as far as it will go. Screw the head into the tripod socket on the bottom of the camera and turn so that the focal length markings on the bottom ring are convenient to read. Retighten the clamp lever and mount the head and camera on a tripod.

Note: If the camera is not absolutely level, successive frames of a panoramic sequence will not match perfectly. Use the built-in bubble level to adjust the tripod until it is level. Check the adjustment with the camera in several positions to make sure that it will be level for the entire series of shots.

The 135mm or longer focal length lenses are not fit for use with the Panorama Head because of the possibility of blurred images caused by camera shake.

Shooting a panoramic sequence

The bottom ring of the panorama head has settings for 28mm, 35mm, 50mm, 85mm and 105mm Nikkor lenses. Set the number corresponding to the lens you are using opposite the white indicator dot. Make the first exposure, then turn the milled top ring in either direction until it clicks into place. Make the second exposure and repeat the procedure for the desired number of frames.

You can also use the 20mm or 24mm lenses by aligning the 28mm setting with the indicator dot. Use the 50mm setting for the 45mm and the 85mm setting for the 55mm lens.

If the click-stop feature is not desired, set the white dot on the bottom ring opposite the indicator dot. The top ring will turn smoothly without stopping.

Instructions, maker’s box Mint

This remote control device is designed for use with the Nikon F5, F100, F90X, F90, D1-Series or Multifunction Battery Pack MB-D100 attached to the D100. By using Adaptor Cord MC-26, the MC-20 can also be connected to a Nikon F70, F4S & F4E (other than F4), F-801/F-801s, F-501 or F-301 camera, Nikon Motor Drive MD-4 attached to a Nikon F3-Series camera, or MD-12 attached to an FM2/FM3A camera. It enables you to perform remote control operations away from the camera. In addition to normal shooting, you can perform long-time exposure with the long-time exposure mode. Also, when time mode is selected, the shutter opens and the time exposure begins with the first press of the shutter release button, and the shutter closes and the time exposure is terminated with the second press of the shutter release button. During time mode, the exposure time is displayed on the LCD panel.

This 3m remote shutter cord is for Nikon Motor Drives MD-4 & MD-12

The Remote Cord MC-12A is exclusively designed for use with the Nikon Motor Drive MD-4 attached to the Nikon F3-series camera, the Motor Drive MD-15 attached to the Nikon FA camera, or for direct use with the F4s, F-801, F-501 or F-301 camera. It can also be attached to the MD-12 motor drive. It enables you to perform remote control operations up to 3 meters (10 feet) away from the camera.

The Remote Cord MC-12A is exclusively designed for use with the Nikon Motor Drive MD-4 attached to the Nikon F3-series camera, the Motor Drive MD-15 attached to the Nikon FA camera, or for direct use with the F4s, F-801, F-501 or F-301 camera. It can also be attached to the MD-12 motor drive. It enables you to perform remote control operations up to 3 meters (10 feet) away from the camera.

maker’s box Mint

This 3m extension cord has 10 pole sockets at both ends.

Boxed with instructions.

Nikon TTL Remote Cord SC-24 enables you to use Nikon Speedlight SB-15, SB-16B, SB-20, SB-21B, SB-22, SB-22s, SB-23, SB-24, SB-25, SB-26, SB-27 or SB-28/28DX for TTL auto flash operation, even when Nikon 6X High-Magnification Finder or Waist-Level Finder is attached to your Nikon F5 or F4/F4s camera. As the speedlight can be used at up to 1.5m (4.9 ft.) from the camera body, you can take advantage of a wide range of flash photography settings. For convenience, automatic sync speed setting and viewfinder lea ready-light indication are available too. In addition, you can use Nikon Speedlight SB-11, a SB-14 or SB-140 when using the SC-24 with Nikon TTL Remote Cord SC-23. Two TTL multiple flash terminals and one tripod socket are provided.

Last of the brand new stock.

The wireless LAN adapter WT-2 (usable with the D2X) for wireless data transmission in a wireless LAN (local network) complies with the latest wireless standard IEEE 802.11b/g.
The WT-2 achieves very high data transfer rates, supports a wide range of network protocols and ensures a high security standard.
With Nikon Capture software, the camera to which the transmitter/receiver module is connected can also be remotely controlled and remotely triggered by computer via the computer.

Unboxed.

For the Nikon F100. The MB-15 increases film advance from 4.5 to 5 fps no matter which batteries are used. It features an alternative shutter release button and a command dial for comfortable vertical shooting and runs on six 1.5V LR6 (AA-size alkaline) or 1.5V FR6 (AA-size lithium) batteries, or on an MN-15 Ni-MH rechargeable battery pack (not included).

Specially designed to handle a bulk film load of 250 exposures, the MZ-1 is used with the Nikon MF-1 Magazine Back. The MZ-1 is always used in pairs-one for film supply, the other for film take-up-and eliminates the need for film rewind. The special outer-and-inner shell design assures friction-free and smooth film transport, thus adding up to motor drive performance. A protective leather case is provided

This is the very rare first F-36 motor drive for the Nikon F circa 1959. It is the 296th one manufactured and has Nippon Kogaku Tokyo (Japan Optical) triangle logo and serial number engraved on the base. It comes complete with the first type green/grey finish battery shoulder pack and grey connecting cord. Furthermore, it is supplied in the original grey finish maker's box. This was a time prior to branding the boxes with the Nikon logo. It is stamped on the base of the box Motor Drive No. 97296

*Does not include NIkon F camera body.

Unboxed.

The Nikon MD-12 motor drive fits the Nikon FM2 and FE2. Up to about 3.5 fps (at shutter speeds faster than 1/125 sec). Single frame (S), continuous (C). With "S" setting: FM2 1-4000 sec, FE2 8-1/4000 sec. With "C" setting FM2 1/2 - 1/4000 sec., FE2 8-1/4000 sec, Auto, M250.
Pilot light: LED lights up during duration
Power switch: On/Off switch
Remote control: Possible. Integral Nikon 3-pin jack.
Power source: Eight AA batteries
Weight (without batteries) About 410g
Accessories: Remote cord MC-4A/MC-10/MC-12A

The Nikon MD-4 offers effortless film advance and rewind when fitted to your F3 or F3HP. Choice of single-frame or continuous firing is offered through a selector knob. Secondary shutter release button activates the camera's exposure meter (just as using the regular shutter release would), and the camera can be powered by the batteries in the motor drive if the camera batteries are dead.

Burst mode operates at up to 6 frames per second. Automatic winding stop occurs when the film end is reached, a warning light illuminates, and the film is then rewound in under 8 seconds.

The Nikon MD-4 offers effortless film advance and rewind when fitted to your F3 or F3HP. Choice of single-frame or continuous firing is offered through a selector knob. Secondary shutter release button activates the camera's exposure meter (just as using the regular shutter release would), and the camera can be powered by the batteries in the motor drive if the camera batteries are dead.

Burst mode operates at up to 6 frames per second. Automatic winding stop occurs when the film end is reached, a warning light illuminates, and the film is then rewound in under 8 seconds.

The Nikon MD-4 offers effortless film advance and rewind when fitted to your F3 or F3HP. Choice of single-frame or continuous firing is offered through a selector knob. Secondary shutter release button activates the camera's exposure meter (just as using the regular shutter release would), and the camera can be powered by the batteries in the motor drive if the camera batteries are dead.

Burst mode operates at up to 6 frames per second. Automatic winding stop occurs when the film end is reached, a warning light illuminates, and the film is then rewound in under 8 seconds.

The Nikon MD-4 offers effortless film advance and rewind when fitted to your F3 or F3HP. Choice of single-frame or continuous firing is offered through a selector knob. Secondary shutter release button activates the camera's exposure meter (just as using the regular shutter release would), and the camera can be powered by the batteries in the motor drive if the camera batteries are dead.

Burst mode operates at up to 6 frames per second. Automatic winding stop occurs when the film end is reached, a warning light illuminates, and the film is then rewound in under 8 seconds.

Boxed with Manual.

The Nikon MD-4 offers effortless film advance and rewind when fitted to your F3 or F3HP. Choice of single-frame or continuous firing is offered through a selector knob. Secondary shutter release button activates the camera's exposure meter (just as using the regular shutter release would), and the camera can be powered by the batteries in the motor drive if the camera batteries are dead.

Burst mode operates at up to 6 frames per second. Automatic winding stop occurs when the film end is reached, a warning light illuminates, and the film is then rewound in under 8 seconds.

The Nikon MD-4 offers effortless film advance and rewind when fitted to your F3 or F3HP. Choice of single-frame or continuous firing is offered through a selector knob. Secondary shutter release button activates the camera's exposure meter (just as using the regular shutter release would), and the camera can be powered by the batteries in the motor drive if the camera batteries are dead.

Burst mode operates at up to 6 frames per second. Automatic winding stop occurs when the film end is reached, a warning light illuminates, and the film is then rewound in under 8 seconds.

Suitable for Nikon EM, FG, and FG20 bodies.